Measurement of the surface of dispersed materials and pore size distribution - ASAP 2020 MP

Automated system ASAP 2020MP (Micromeritics) is used to analyze the surface area and pore structure study of dispersed materials. Allows full analysis of micro-and mesopores, their size distribution and surface area determination, warmth and adsorption rate. Measuring the pore diameter range from 0.35 to 500 nm. Samples can be analyzed with a specific surface area of ​​0.2 m2.

1. Measuring range of pore diameter : the lower limit of the range 0.35 nm , the upper limit of the range of 500 nm .

2 . Studies of the physical and chemical adsorption including corrosive gases.

3 . Two independent vacuum systems :

            - Analysis of the sample ,

            - To prepare a sample for analysis.

4 . Pressure measuring range : Lower limit of 0.001 mm. Hg. Art. , the upper limit of 950 mm Hg . , resolution 0.001 mm. Hg. Art. measurement error not exceeding 0.15% of the measured value.

5 . Integrated degassing system with two ports .

6. Temperatures degassing system : the lower limit of the range is not more than the ambient temperature , the upper limit of the range of 450C .

7. Pressure range : Lower limit range of 0 mm Hg . Art. , the upper limit of the range of 950 mm Hg. Art.